Rainbow Swirl Stencil Christmas Card

 

Today I bringing you a Christmas Card featuring the Rainbow Spiral Stencil. I used 4 Simon Hurley Create. Inks.  Two Reds (Love Struck and Game Over) and two greens (Overzealous and Fake Plant).  I started with Love Struck and blended the first stripe.  After I wiped the excess ink off the stencil, I used the lines on the stencil to line up my spiral and then blended with Game Over. I wiped the stencil off again, relined it up with Overzealous and then repeated with Fake Plant.

Continuing to wipe off my stencil between inks, I completed the spiral alternating back and fourth between the red and green inks until my circle was complete.  Next I used some watered down Pearl Aqua Pigment and a paint brush to cover the entire blended area.  This gives the spiral lots of shimmer and shine.

I trimmed the panel to 4" x 5.25" with my paper cutter. Using my scissors, I trimmed out the spiral around the outside and used a circle die to cut out the center.  I adhered the Spiral to and A2 Top folding Card base, lining up the spiral edge with the right edge of my card base. 

Next, I used another circle die to cut some Red Glitterstock for the center of my spiral.  I adhered this with some foam tape.  For a focal point, I stamped one of the elves from Crafty Elves with Raven Detail Ink on Perfect Blend Alcohol paper and colored him in with Copic markers.  After I fussy cut him out, I added some shimmer to the yellow on his outfit and to the red ribbon on the package (also with some watered down Pearl Aqua Pigment).

For my sentiment, I stamped the Merry Christmas from the Snowflake Swirl stamp set with Fake Plant and trimmed it down.  I adhered both my sentiment and elf to the center of the Glitterstock circle with liquid glue.

Finally, I added just a touch of more sparkle with some sequins from my stash.

Here is the video I made to go with this card:

Affiliate Links:

Rainbow Spiral Stencil: https://shrsl.com/3s8j2

Perfect Blend Paper: https://shrsl.com/3s8k8

Pearl Aqua Pigment: https://shrsl.com/3s8jt

Crafty Elves Stamps: https://shrsl.com/3s8jw

Crafty Elves Coordinating Dies: https://shrsl.com/3s8k4

Glitter Stock: https://shrsl.com/3s8k5

Circle Foundation Dies: https://shrsl.com/3s8lm

Raven Detail Ink: https://shrsl.com/3s8k9

Top Folding A2 Card Bases: https://shrsl.com/3s8ka

Simon Hurley Create. Love Struck Ink: https://shrsl.com/3s8kc

Simon Hurley Create. Game Over Ink: https://shrsl.com/3s8ke

Simon Hurley Create. Overzealous Ink: https://shrsl.com/3s8kg

Simon Hurley Create. Fake Plant Ink: https://shrsl.com/3s8kh

Copic Colors:

E000, R20 (Face and cheeks) Green: G28, YG63 Red: R37, R39 Gold: YR24 (belt buckle) Orange: YR09 (hair) Black: C6 (belt)

Love Grows here Slim Line card (Brutus Monroe)

It has been awhile since I had a blog post.  I started a new job last fall and have been attempting to balance my crafting and work life. So today,  I have a slim line card today featuring the stencil of the month and a variety of stamps from the Brutus Monroe.  All of these stamps come from the April Subscription products and I have the links below.

I started by using a slim line precut panel and place it on my Stick and Stamp mat.  I turned the Stencil of the month (called Vintage Tile) on the diagonal over my panel.  I used some post-it note tape to cover the corners of my panel to keep them clean while I blended.  Using some blending brushes and some Simon Hurley Inks for my design, I used each color about a third of the way across the stencil.  I started blending at the top with Shooting Star ink.  In the middle, I used Traffic Cone and ended with Bee Sting, overlapping the inks slightly for a transition.  To remove my panel from the Stick and Stamp mat, I carefully roll the edges of my mat (gently) until the panel "pops" off.  Then I used my Stick and Stamp Mat Mist Cleaner to wipe off an ink.

I then took another piece of the precut slimline panels and blended the same three inks along the edges to create a mat layer that matched my stencil.  I cut the stenciled piece down slightly to about 3" and placed it on my mat, which was cut to about 3.25"  I then used tape runner to attach it to my Precut Slimline card base.

For my images I use some of the images from Bountiful Blooms and Love Grows Here and stamped them on Perfect Blend Alcohol Paper with Raven Detail ink.  I colored in my images with a variety of Copic markers and then cut them out with my Scan and cut.

I arranged the images to on the bottom right of my panel and attached them with liquid glue.  To finish my card, I used the sentiment from the April Stamp of the Month, and adhered it right above my stamped and colored images.  (The stamp+ club is the the stamp of the month and coordinating die which you can find here.)

Brutus Monroe Spooky Kids (6 cards)

Today I have 6 cards to share with you from the Spooky Kids Stamps and Coordinating Die set from Brutus Monroe.  Each card also features a different stencil and glaze also from Brutus Monroe. 

VAMPIRE

I started with Raven Cover Cardstock cut down to 4.25" x 5.5". I used some low tack tape to attach the Batty Stencil to my cardstock.  Using a silicone spatula, I spread some of the Night Sky Velveteen Glaze in the upper corner of the stencil and covered just part of it.  I only wanted a small pattern of the bats for this card.  I set the panel aside to dry.  Once it was dry I used the second largest Rectangle Foundation die to cut it out.  I used another Rectangle die from my stash to cut out a mat layer from Scarlet Cover Cardstock.  I used my embossing bag to treat the Scarlet cardstock and stamped the sentiment from Spooky Sentiments with Brutus Monroe Embossing Ink, in the center.  I covered the sticky ink with Raven Embossing Powder and heat set it.  I used a banner die from my stash to cut out the sentiment.   (Using the middle of the mat paper for my sentiment saves on paper and once I mat the Black card panel on the top, no one will ever know that I cut out a piece from the Scarlet mat.)  I stamped the Vampire from the Spooky Kids stamp set with Raven Detail ink on some Perfect Blend Alcohol Paper.  Then I colored him in with a variety of Copic markers and cut him out with the Coordinating Die.  I used liquid glue to put my card panel together with the Image, sentiment and mat.  My cardbase is made from Raven Cardstock and is standard A2 size.  For the inside of the card, I placed another piece of Scarlet cardstock, and stamped a Happy Halloween sentiment with Raven detail ink.

GHOST

I started with Raven Cover Cardstock cut down to 4.25" x 5.5". I used some low tack tape to attach the Hoiden Stencil to my cardstock. I carefully covered just the stencil with Glow in the Dark Chromas Glaze, making sure not to go outside the edges of the stencil (this is a circular stencil). I set this panel aside to dry.  Once it was dry I cut it with the second largest Rectangle Fondation Die and my mat was cut with a large Rectangle die from my stash and a green piece of paper from my scrap bin.  I used my powder tool on the green mat and stamped the sentiment from Spooky kids with Brutus Monroe Embossing ink.  After covering with Raven Embossing Powder, I heat set it and cut it out with a rectangle die.  I stamped the Ghost from Spooky Kids with Raven Detail ink on Perfect Blend Alcohol Paper and colored him in with Copic markers. After I used the coordinating die to cut him out, I used liquid glue to attach my sentiment and image to the front of my panel.  Then I attached the panel to the green amat.  To finish my card,  I chose a white A2 Card base and used liquid glue to attach my matted panel.

ZOMBIE

 I started with Raven Cover Cardstock cut down to 4.25" x 5.5". I used some low tack tape to attach the Slim Line Ripple Stencil to my cardstock at an angle. I covered the edges of my stencil with low tack tape to protect the card panel. Using a Silicone spatula, I spread some Lima Bean Velveteen Glaze across the entire stencil.  (My mind saw this stencil as a brain pattern, which I thought would fit nicely with the zombie.) While the panel was drying, I stamped my image with Raven Detail ink on some Perfect Blend Alcohol Paper,colored it in with Copics, and cut it out with its coordinating die.  Next, I cut down a green piece of paper with a rectangle die from my stash.  I treated the paper with my embossing bag and after stamping my sentiment from Spooky Sentiments with Brutus Monroe Embossing Ink, I covered it with Raven Embossing powder, heat set it and cut it out with a die from my stash.  Once my panel was dry, I used the second largest of the Rectangle Foundation dies to cut it out and mat it on my Green piece.  I used liquid glue to attach my zombie and sentiment to the front of my stenciled panel.  I attached the entire thing to a Raven A2 card base.  Inside I included another piece of green paper with a Happy Halloween Sentiment stamped on it.

WITCH

Taking a piece of white cardstock I attached the Random Dots Stencil with low tack tape.  I took some Marmalade and Amethyst Glitter Glaze and spread each color on a different side.  Then I carefully combined the colors in the middle.  I set the panel aside to dry and worked on my image.  The Spooky Kids witch was stamped on Perfect Blend Alcohol paper with Raven Detail ink and colored in with Copic markers.  I used the Coordinating die to cut her out.  Next, I looked through my scrap bin and found a light purple piece of patterned paper and cut it out with a rectangle die from my stash.  I cut a circle out of the center of the purple panel.  After treating the circle with my embossing bag, I stamped the sentiment from the set with Embossing Ink and covered it with Alabaster Embossing powder.  After heat setting it, I attached it to the front of my card panel along with my colored witch with liquid glue.  Then I glued the panel to my purple mat and then glued the whole thing to the front of my landscaped A2 white card base.

FRANKIE

I started with Raven Cover Cardstock cut down to 4.25" x 5.5". I used some low tack tape to attach the Slim Line Pathway Stencil to my cardstock. I covered the right edge of my card panel with low tack tape to protect it from my glaze.  I used a silicone spatula to spread the Purple Galaxy Glaze over the stencil.  Once I removed the stencil, I sprinkled some Fallen Snow Glitter over parts of the wet glaze for some sparkle and set the panel aside to dry. Next, I stamped the zombie image on some Perfect Blend Alcohol Paper with Raven Detail ink, I colored it in with Copic markers and cut it out with the coordinating die.  Using a scrap piece of purple paper cut down with a Rectangle die from my stash, I stamped my sentiment from the set with Embossing ink.  I sprinkled it with Alabaster Embossing Powder and heat set it.  Then I used a rectangle die to cut it out of the center of my mat.  Once.my Galaxy glaze panel was dry, I used the second largest Rectangle Foundation die to trim it down and attach it to my purple mat.  I used liquid glue to attach my sentiment and Frankie to the front of my panel.  Then I attached the entire thing to a white A2 card base.

PUMPKIN

I started with a piece of white cardstock cut down to 4.25" x 5.5". I used some low tack tape to attach the Kramer Stencil to my cardstock.  I used a silicone spatula to spread some Lima Bean Velveteen Glaze over the entire panel and then set it aside to dry.  One it was dry, I cut it out with the second largest Rectangle Foundation die.  I matted the panel on a piece of orange with white polkadot paper from my scrap bin.  This patterned paper was cut down to a mat side with another rectangle die from my stash.  Before I attached the panel to the patterned paper, I cut out a rectangle from the center with a die from my stash.  I treated this rectangle with my antistatic bag and stamped my sentiment with Brutus Monroe Embossing Ink.  I covered the ink with Raven Embossing Powder and heat set it.  I attached the Pumpkin girl and sentiment to the front of my matted Velveteen panel with liquid glue.  Then I attached the entire thing to my white A2 card base.

List of Products Used (available in the Brutus Monroe Store):  Affliated links are not at any additional cost to you, however, they help support me to bring you new content.

• Spooky Kids Stamp Set
• Spooky Kids Coordinating Die Set
• Raven Cover Stock
• Scarlet Cover Stock
• Perfect Blend Alcohol Paper
• Raven Detail Ink
• Embossing Ink
• Alabaster Embossing Powder
• Raven Embossing Powder
• Rectangle Foundation Dies
• Circle Foundation Dies
• Kramer Stencil 
• Random Dots Stencil
• Glow in the Dark Chroma Glaze
• Galaxy Glaze - Purple
• Lima Bean Velveteen Glaze
• Night Sky Velveteen Glaze
• Twilight Purple Glitter Glaze (amathyst was a glitter glaze of the month so this would be a good substitute)

(I apologize but the Batty, Hoiden and Ripple Slim Line stencil are all retired at this time.  Orange Marmalade was a glitter glaze of the month.)

Got Brains? Halloween Card with Brutus Monore

Today's card was inspired by one of my favorite TV shows. I started by stamping the adorable Zombie from Spooky Kids with Raven Detail ink on Perfect Blend Alcohol Paper.  Then I colored him in with some Copic Markers.  I used the coordinating die to cut out the image and then I cut 4 more zombies out of white scatch paper and glued them all together.  This builds dimension behind my colored image.

My cardbase is made from Raven Cardstock and is an side folding A2 card. I placed it in my splat box and splattered some Pearl Shimmer Spray.  Next a peice of gray cardstock and stamped it with a woodgrain stamp from my stash with Woof! ink from Simon Hurley Creates.  Then I cut it out twice with the Woodland Forest Die.  

For my zombie herd, I cut several from black cardstock scraps.  I used a blending tool and Pumice Stone Distress Oxide ink on each of the zombies to give a little shadow to each diecut.  Once my background was dry, I layed the black zombie die cuts and once I was happy with the placement, I used some press n seal to pull my zombies up all together.  I flipped the press n seal over and used liquid glue to attach all the zombie together.  Then I covered the entire herd with liquid glue and flipped it over on top of my background.  Then I carefully removed the press and seal, which helped my place the zombie right where I wanted them.

Then I used some glue to attach my Woodland Forest Die Cuts on top of my zombie herd.  Next, I cut off any overhang.  For a sentiment I grabbed an older stamp set and stamped the Got Brains? with Raven Detail ink on a scrap of Perfect Blend Alcohol paper and used my trimmer to cut it down.

Finally, I used more liquid glue to attach my colored Zombie to the lower right corner of my card. Because of the dimension, I used an acrylic block to hold him in place until the glue dried.

STAMPtember 2021 Brutus Monroe Limited Edition Set

Today is the day for the Limited Edition Brutus Monroe #Stamptember set with Simon Says Stamp. This set is only availble in September and while supplies lasts over at Simon Says Stamp.

Apple Card: 

I started by stamping out the apple and sticking with Raven Detail ink on Brutus Monroe Perfect Blend Alcohol Paper. Next, I colored them in with Copic Markers.  Then, using my Scan and cut to Cut the images out and attach the stick to the back of my apple with a piece of washi tape.  For my card panel, I took a piece of Brutus Monroe Scarlet Cardstock and cut it down to 4.25" x 5.5."  Using my Misti, I stamped the caramel apple image all over the paper with Brutus Monroe Embossing Ink.  Then I covered the entire panel with Pearl Embossing Powder from Brutus Monroe and heat set it.  I cut down the panel to about 4" x 5.25" and attached it the front of my top folding A2 white card base.  To attach my colored image, I used some of Brutus Monroe's Easy Foam Tabs.  I stamped the sentiment with Simon Hurley Creates Bee Sting ink and used a sentiment strip die to cut it out.  Finally, I attached the sentiment to the front of my card and trimmed off any overhang.  

Snowman Card:

I started out stamping the snoman image on Brutus Monroe Perfect Blend Alcohol Paper with Raven Detail ink.  I used Copics to color in my image and then fussy cut it out.

Using an older Darice Embossing folder, I ran my white card panel through my Big Shot and trimmed it down to about 4" x 5.25."  I chose a piece of paper from the Brutus Monroe Playful Plaid pack and cut it down to A2 card front size.  Using a small piece of the same paper,  I cut an rectangle to mat behind my Snowman piece and attached it to my embossed white panel.  I stamped the sentiment from the set with Raven Detail ink in the top left corner above my image and then matted the panel to the plaid mat.  After I attached the matted panel to my A2 Card base, I used some glossy accents on the eyes, mouth and hat brim of my image for some shine.

Halloween Card:

I stated with a Precut Slim line panel from Brutus Monroe and placed it in my splat box.  I used some Cobweb Limited edition to spray the front of my panel.  Then I used  Tangerine Orange Chroma Mist, (removing the nozzle and using the tube) to splatter over the background.  Next, I used some Creamy Green and Pearl Aqua Pigments which I mixed with some water on an acrylic block, and splattered this over the entire panel with a paint brush.  I repeated this with Hunter mixed with Pearl Aqua Pigments.  To speed the drying, I heated the panel with my heat tool.  Then I used the Spooky Eyes Slim Line Stencil and  spread the Glow in the Dark Chroma glaze over the panel.  After removing and cleaning my tools, I set the panel aside to dry. While the panel dried, I stamped my images with Raven Detail ink on Perfect Blend Alcohol paper and colored them in with Copic Markers. Once my panel was dry, I cut it down to 3" x 8.25" and matted it on a piece of Raven Cardstock that measured 3.5" x 8.5."  I arranged the panel in my Misti and stamped the Spooky sentiment in Raven Detail Ink, using the mummy apples for placement.  I attached the Mummy Apples with liquid glue.  Then I adhered the entire panel to my Precut Slim line card base from Brutus Monroe.  Finally, I added some Glow in the Dark Chroma Glaze to the eyes of my images with a fine tip paint brush. 

Here is a close up of the Pearl Embossing Powder on my apple card:

If you have not tried the Glow in the Dark Chroma Glaze, you should get some right away, its amazing.  Here is a picture of the Back ground.  I did not charge the "glow" for long:

I included my affliated (with no cost to you) to all the products available in the Brutus Monroe store above.

However to purchase the STAMPtember stamp and die set for a limited time, while supplies last. Here is a link to the set at Simon Says Stamp: https://www.simonsaysstamp.com/product/brutus-monroe-stamptember-exclusive-stamp-and-die-set-sssd112486c?c=2553

Customers can also purchase the stamp set for a limited time, while supplies last. https://www.simonsaysstamp.com/product/waffle-flower-stamptember-exclusive-stamp-set-sss202410c?c=2553

Trio of Halloween Slimline Cards with Brutus Monroe

 

Today I am up on the Brutus Monroe Blog.  Fall is tied as my favorite season along with winter (shocking I know).  However I love Halloween, my daughter was born in October and fittingly could celebrate Halloween all year round.  I always tried to make Halloween special for her and I love making her Halloween cards.

Today I have three cards for you featuring the witches from the Crafty Witch and Witches Brew Stamp sets.  All three cards were made the same but with different stamps, inks and stencils.

To start, I cut down three heavy white cardstock to 8.5" x 7" panels, scored each at 3.5" to create my card bases.  Each 8.5" x 11" cardstock gives me one card base and a card panel.  The card panels measure 8.5" x 4" which I cut down to 8.5" x 3."  First I used Raven Detail ink to stamp the three witches on the bottom half of the card panels.  Then, I used Copic markers to color them.  

Before I inkblended my backgrounds, I created masks for each witch with Masking Paper (or you could use Post-it note paper).  I trimmed each mask down the middle of the outside edge of each stamp.  This gives me masks that are slightly smaller than my image, but yet still cover up the image completely.

Once I covered each colored image with their coordinating masks, I used Distressed inks to lightly ink each background.  Then I used the same ink and a stencil to heavily apply the pattern to a few areas around the panel.

For the Spell Book witch, I used Seedless Preserves and the Batty Stencil.

For the Pumpkin witch, I used Twisted Citron and the Hidden Temple Stencil.

For the Cauldron witch, I used Carved Pumpkin and the Honeycomb Stencil.

Next, keeping the masks in place, I place the three panels in my splat box so I could add some splatter.  For the Black Splatter, I used Raven detail reinker and a tiny bit of water to thin it out on an acrylic block and a paint brush to flick it over the card panels.  For the Shimmer splatter, I removed the pump/sprayer from the Pearl Shimmer Mist and used the plastic tube and lightly shook it over the card panels.

Once the panels dried, (it took about 15 mins) I placed each panel in my Original Misti and stamped the sentiments from Crafty Witch with Raven Detail ink towards the top of each panel.  Then I matted each panel on some Raven Cardstock that measured about 3.25" x 8.5" and then finally glued the panels to my white card bases.

Which card is your favorite?  Do you decorate for fall or  Halloween? Thank you for stopping by and have a great day.

Haunted House Slim Line Card with Brutus Monroe

 

Starting with a 8.5" x 3.5" white card panel, I placed the Simple Blends Circle stencil in the middle of my panel.  Using a blending tool, I inked the center of the stencil with Squeezed Lemonade Distress Oxide Ink and the outer part with Mustard Seed Distress Oxide Ink. Once I was happy with the blend, I removed the stencil and covered my inked Circle with the Negative from the Simple Blends Circle Stencil.  I lightly blended the edges with Antique Linen and Squeezed Lemonade Distress Oxide Inks to create a halo effect around my Moon.

Next I blended Stormy Sly and Blueprint Sketch Distress Inks to create a dark night sky.  To increase the effect, I blended a little Black Soot Distress Ink around the edge of the panel to deepen the darkness.  Next, I lightly misted the background with water and Pearl Chroma Mist to create "stars" in the sky.

While I let my ink dry into the paper, I stamped out the house from Beware Blvd on Perfect Blend Alcohol Paper with Raved Detail ink.  I let the ink dry for about a minute and then colored it in with a variety of Grey Copic Markers. I used W9, W7, W5, W3 on the house and chimney.  For the Room I used C7, C5, and C3.

For the eyes I used YR23 and W1 for the windows.  Then I used my scissors to fussy cut it out.  To clean up any edges, I used my Memento Black marker to go around the edges. I used Y06 to color in the space between the house and the pipe to match my moon.

Once my background panel was dry, I used my antistatic powder bag over the front of my panel and placed it in my Misti.  I lined up the tree from the Crafty Witch stamp set and stamped it several times with Embossing Ink.  I covered the sticky ink with Raven Sparkle Embossing Powder and set it with my heat tool.  I repeated this with the other side of my panel.

I used liquid glue to attach my haunted house to the middle of my panel.  For my sentiment I used the Enter if you Dare stamp from Beware Blvd and stamped it on vellum with Embossing ink.  I covered it with Raven Sparkle Embossing Powder and heat set it.  I cut it out with a Circle Foundation Die and used my finger to smear some liquid glue on the back to attach it to the right of my Haunted House.  Finally, I cut my panel down about 1/8" and matted it on black cardstock and then onto a 8.5" x 3.5" white cardbase.

Oh My Gourd! I miss you, New Release from Brutus Monore

 Today, I am sharing a quick card using one of the newest Brutus Monroe stamps released yesterday called Oh My Gourd!  Fall is just around the corner, and this release is perfect for all your fall need. This sets features two sentiments and a fantastic pumpkin image that can fill up your A2 card front, however it also fits wonderfully on a slim line card.  You can also get the coordinating die to cut out the pumpkin!

I started with an 8.5" x 3" white card panel and lined it and the pumpkin stamp in my Misti.  Using Raven detail ink, I stamped the image a couple of times (which I always do with new stamps) to get a clean, dark, crisp image.  Next, I started coloring my image with Copic Markers.  Here is a list of the markers I used:

• Pumpkin body: YR12, YR16, YR18
• Leaves:  G46, G24, YG63,
• Stem:     G46, G24, YG63, E33
• Vines:    G46
• Flowers: YR21, YR23, Y08

Once I was happy with my coloring, I decided I wanted more color on my panel.  I used a blending tool and some yellow ink from my stash to blend from the sides of my card panel.  I kept the blending heavier on the edges and just light color to white in the middle. For some interest, I splattered on some Bumbleebee Chroma Mist.  To do this, I took the nozzle out of the bottle and just lightly shook it to drip all over the front of the panel, being extra careful around my colored image.

While the Chroma Mist dried, I cut the I miss you sentiment from some dark green cardstock (from my scrapbin) and attached that the the panel with liquid glue. The miss you is from the Dotted Heart Cutting Die set.  I trimmed the missing down to miss and used the extra "i" to complete my sentiment.  Then I lined up the panel in my Misti again, and stamped the Oh My Gourd! sentiment in Raven Detail Ink about the die cut words.

Finally, I trimmed down my panel slightly on the top and bottom and attached it to my card base.  For my card base, I trimmed an 8.5" x 11" card base to 8.5" x 7," scored and folded at the 3.5".

Pop over to the Brutus Monroe Store and get your Fall stamps now!  For more of my creations, you can find me on Instagram here.

2 cards using 3" x 4" stamp sets

 Today's post brings  you two cards using a couple of Brutus Monroe 3" x 4" Stamp Sets.

The first card today uses the Flower Gnome stamp.  I started by stamping the gnome out on Perfect Blend Alcohol Paper with Raven Detail Ink.  Next, I colored the gnome in with a variety of Copic markers.  I did not keep a list of markers this time, I just grabbed a color to start, and went from there.  When finished, I used my Scan N Cut to trim my image down leaving a 1/4" white border.  I was sad to notice that I did not pay attention and the SNC cut part of the bottom off but decided I would just go with it and camouflage this with my sentiment.

For my card panel, I looked through my stash and found a scrap of yellow cardstock that matched the yellow from the Copic Markers.  I taped the panel with the Mixed Media Stencil Flower Burst with some temporary tape and covered it with the Pearl Chroma Glaze.  (Tip:  I only apply the glaze in one direction, this helps with keeping the glaze where I want it and not to seep into other areas.) I set this aside to dry overnight.  (Tip: Since I do most of my weekly crafting at night; I make several backgrounds at once and set them aside to dry overnight so I can continue the next day.)  I used more of the same yellow cardstock to cut out a circle with one of the Circle Foundation Dies.  I stamped the sentiment from the set with Raven Detail ink.

I decided to ground the gnome with about a 1/2" blue strip (also from my scraps).  I attached the blue strip and the gnome to my dry Chroma Glaze panel with liquid glue.  Then I used glue to place my sentiment circle to overlap the part of the gnome that was cut off.  Finally, I attached the whole panel to the front of my white A2 card base.

Here is a close up that shows the shimmer from the Pearl Chroma Glaze.

For my second card today, I used the Stand by You stamp set and a piece of paper from the Fabulous Flamingos (which I believe is retire now).  I used some temporary tape to attach the Slim Line Tea Leaf Stencil to the top part of the paper.  I spread some of the Bubble Gum Chroma Glaze over the top and carefully removed the stencil, put it aside to dry overnight.

Next, I stamped the Flamingos with Raven Detail Ink and colored them in with Copic Markers.  I then fussy cut them out with my Detail Scissors.  I decided to cut them out separately to put on my card base because I did not want to color in the background or leave all that empty white space.

The next day when my background was dry, I cut it down to 3-1/4" x 6-1/4 which is slightly smaller than my Mini Slim White card base @ 3-1/2" x 6-1/2."  I attached the two flamingos right about wherei stopped the Chroma Glaze.  Then, I used my Quickie Glue pen to color in the feathers on the head, the tip of the beaks, the water, and the wings of the flamingos.  I quickly covered the wet glue with some Glitter and shook off the extra.

I left the sentiment off the front of my card.  Instead, I chose to stamp the I'll Stand By You on the inside with Raven Detail Ink.

Here you can see the glitter on my flamingos.

**please note I put affliated links above where product is available in the Brutus Monroe Store.  Affliated links do not cost you anything extra, however I get a small compensation which helps me bring content to my blog.