You're My Favorite Dad (Brutus Monroe June 2022 Stencil of the month)

 

Since Father's Day is this weekend, I thought I would show you the card I made for my dad.  Sometimes its hard to know what to use for a masculine card and my go-to is usually a brown and a blue color.

I started with the June 2022 Stencil of the month Groovy Grid.  Using my Stick and Stamp Mat and coordinating Blending Buddy, I placed my 4.25" x 5.25" white card panel in the middle, with the stencil on top.  I used my blending tools to add Simon Hurley Creates Grrr! and Clear Skies inks in a random panel over the stencil.

Then I cut the panel and a brown mat with some stitched rectangle dies from my stash.  I cut the dad from the center of my brown mat (since it will be covered by my panel).  

Next I cut out two of the smaller and one of the larger leaves from the Fabulous Florals set and ink blended some Clear Skies ink over them. I just used what was left on my brushes and did a light coat so that some of the white cardstock showed through as well.

For my companion sentiment, I stamped the You're my Favorite (from Super Sentimental) in Clear Skies in and cut it out with a stitched die from my stash.  To soften the white of the circle, I lightly blended some of the leftover Grrr! ink from my brush around the edges and along the edges of my dad letters (cut from an alphabet set in my stash).

After I matted the card panel and mat to my Precut A2 Card base, I used the Dad letters to line up my circle sentiment and leaves.  Finally, I added my DAD over the top of the leaves and just overlapping the bottom of my companion sentiment a bit.

Here is a look at my card one more time:

Thanks for joining me today.  Have a fabulous rest of the week and remember to create something everyday!  

 

Love Grows here Slim Line card (Brutus Monroe)

It has been awhile since I had a blog post.  I started a new job last fall and have been attempting to balance my crafting and work life. So today,  I have a slim line card today featuring the stencil of the month and a variety of stamps from the Brutus Monroe.  All of these stamps come from the April Subscription products and I have the links below.

I started by using a slim line precut panel and place it on my Stick and Stamp mat.  I turned the Stencil of the month (called Vintage Tile) on the diagonal over my panel.  I used some post-it note tape to cover the corners of my panel to keep them clean while I blended.  Using some blending brushes and some Simon Hurley Inks for my design, I used each color about a third of the way across the stencil.  I started blending at the top with Shooting Star ink.  In the middle, I used Traffic Cone and ended with Bee Sting, overlapping the inks slightly for a transition.  To remove my panel from the Stick and Stamp mat, I carefully roll the edges of my mat (gently) until the panel "pops" off.  Then I used my Stick and Stamp Mat Mist Cleaner to wipe off an ink.

I then took another piece of the precut slimline panels and blended the same three inks along the edges to create a mat layer that matched my stencil.  I cut the stenciled piece down slightly to about 3" and placed it on my mat, which was cut to about 3.25"  I then used tape runner to attach it to my Precut Slimline card base.

For my images I use some of the images from Bountiful Blooms and Love Grows Here and stamped them on Perfect Blend Alcohol Paper with Raven Detail ink.  I colored in my images with a variety of Copic markers and then cut them out with my Scan and cut.

I arranged the images to on the bottom right of my panel and attached them with liquid glue.  To finish my card, I used the sentiment from the April Stamp of the Month, and adhered it right above my stamped and colored images.  (The stamp+ club is the the stamp of the month and coordinating die which you can find here.)

I can be Anything! featuring Brutus Monroe's Nov ATC Kit Unique Pets

 

Today I bring you a fun card featuring the stamp from the November ATC kit-Unique Pet.  I started by choosing a background from my stash that I made with Alcohol ink on Yupo paper.  After treating the front with my antistatic bag, I stamped the Chameleon with the Brutus Monroe Embossing ink and covered it with Raven Detail Embossing Powder.  I carefully heat set the powder, making sure to not get my heat tool too close to the paper (Yupo paper is plastic) and to continue to move my heat tool until all the powder was melted.  

For my back ground I used the Circle Tone stencil and blended Simon Hurley Creates Overzealous ink.  Before I removed my stencil, I spread Fallen Snow Glitter Glaze.  I removed the stencil and cleaned everything up.  While I left my panel to dry, I fussy cut out the Chameleon.  Then I found a light green piece of paper from my scrap bin and stamped the sentiment from the set with Raven Detail ink.  

I took the largest branch from the Birdhouse Builder Set and cut it out of wood grain paper. Once my panel was dry (about 30 mins) I used liquid glue to attach everything the the front of my panel.  Then I used some adhesive to attach the panel to my white A2 card base.

Brutus Monroe Oh My Gourd Aqua Pigment Shaker Card

I started with a piece of Black Watercolor paper and some White and Pearl Aqua Pigments on my glass mat.  I sprayed the Aqua Pigments with a little water and then pressed my watercolor paper into it.  I kept ink smooshing my paper and drying in between until I was happy with my pattern.  Next I used the Oh my Gourd die and ran my panel through my die cut machine, keeping the negative for my card and putting the die cut aside for now.

Then, I cut about 6 -8 more of the negative panels with the die from white scrap cardstock and glued them all together.  I used some strong double sided tape to the back of my black die cut panel and attached a piece of acetate to the panel.  Then I used more strong double sided tape to the front stacked white die cut pieces.   I flipped over the stacked panels with the negative or frame.  I temporarily placed the Oh my Gourd die cut into the center of the negative stacked piece. After spreading liquid glue all over the Oh my Gourd die cut piece and carefully lined up my A2 Card base on top.  After gently flipping it over, I removed the negative/frame piece and pressed the Oh my Gourd die cut piece in place.  

Then I added some glitter and sequins to the center of my card panel, right in the center of the Gourd.  Then I added more double stick tape and some liquid glue to the negative/frame piece.  I attached it to the front of my  card base creating a shaker card.  Then I took a piece of white cardstock and stamped the hell Gourd-Geous sentiment with Raven Detail ink and cut it out with a banner die.  I attached the sentiment to the front of the panel to finish the card.

Here is a list of the products used that are available in the Brutus Monroe store, like always these affliated links do not cost you anything extra, however they help support me to bring you new content.

• Oh My Gourd Stamp Set
• Oh My Gourd Die Set
• Pearl Aqua Pigment
• White Aqua Pigment
• Raven Detail Ink

Brutus Monroe Grateful For You Slim Line Card

I started by taking Bee Sting, Sike! and Slippery When Wet inks from Simon Hurley Creates and blended up a couple of white card panels.  Then I used my antistatic bag to treat the front of the panels, lined them up (individually) in my Original Misti and stamped both of the leaf images from Grateful Greetings with Brutus Monroe Embossing Ink.  I covered the ink with Gilded Embossing Powder and heat set it.  (I repeated this until I had 6 embossed images--I only needed 5).

Next I cut out each of the Embossed panels with the coordinating die, and trimmed the end off with my paper trimmer.  I also cut out 10 pieces of the die cut with Kraft paper.  I stacked two of each die cut together with liquid glue and attached one of my Inkblended/Embossed images on top.  This creates dimension for the front of my card.  I created my card base from some Kraft Colored cardstock.  I cut the 8.5" x 11" cardstock down to 8.5" x 7" and scored at 3.."  This creates a slim line card base that measures 8.5" x 3."

I chose my sentiment from the stamp set and used my die cuts for placement and then stamped it in Embossing Ink.  I also covered it with Gilded Embossing Powder and heat set it.  Then I used liquid glue to attach one of my Embossed Die cuts opposite of my sentiment.  Then I placed two of the Embossed Die cuts to the left side of my card base.  For my last two pieces, I attached them at an angle on the right side of my cardbase in each corner.  Finally, I used my paper trimmer to cut off an overhanging piece of die cuts.

Here are (affliated) links to the products used in the Brutus Monroe Store-as always affilated links do not cost you anything extra, they just help me bring you new content.)

• Grateful Greeting Stamp Set
• Grateful Greeting Die Set
• Lunch Bag pCover Stock (I used a kraft color for my stash but this would be a similar color).
• Embossing Ink
• Gilded Embossing Powder
• Simon Hurley Bee Sting Ink
• Simon Hurly Sike! Ink
• Simon Hurley Slippery When Wet Ink

Brutus Monroe Spooky Kids (6 cards)

Today I have 6 cards to share with you from the Spooky Kids Stamps and Coordinating Die set from Brutus Monroe.  Each card also features a different stencil and glaze also from Brutus Monroe. 

VAMPIRE

I started with Raven Cover Cardstock cut down to 4.25" x 5.5". I used some low tack tape to attach the Batty Stencil to my cardstock.  Using a silicone spatula, I spread some of the Night Sky Velveteen Glaze in the upper corner of the stencil and covered just part of it.  I only wanted a small pattern of the bats for this card.  I set the panel aside to dry.  Once it was dry I used the second largest Rectangle Foundation die to cut it out.  I used another Rectangle die from my stash to cut out a mat layer from Scarlet Cover Cardstock.  I used my embossing bag to treat the Scarlet cardstock and stamped the sentiment from Spooky Sentiments with Brutus Monroe Embossing Ink, in the center.  I covered the sticky ink with Raven Embossing Powder and heat set it.  I used a banner die from my stash to cut out the sentiment.   (Using the middle of the mat paper for my sentiment saves on paper and once I mat the Black card panel on the top, no one will ever know that I cut out a piece from the Scarlet mat.)  I stamped the Vampire from the Spooky Kids stamp set with Raven Detail ink on some Perfect Blend Alcohol Paper.  Then I colored him in with a variety of Copic markers and cut him out with the Coordinating Die.  I used liquid glue to put my card panel together with the Image, sentiment and mat.  My cardbase is made from Raven Cardstock and is standard A2 size.  For the inside of the card, I placed another piece of Scarlet cardstock, and stamped a Happy Halloween sentiment with Raven detail ink.

GHOST

I started with Raven Cover Cardstock cut down to 4.25" x 5.5". I used some low tack tape to attach the Hoiden Stencil to my cardstock. I carefully covered just the stencil with Glow in the Dark Chromas Glaze, making sure not to go outside the edges of the stencil (this is a circular stencil). I set this panel aside to dry.  Once it was dry I cut it with the second largest Rectangle Fondation Die and my mat was cut with a large Rectangle die from my stash and a green piece of paper from my scrap bin.  I used my powder tool on the green mat and stamped the sentiment from Spooky kids with Brutus Monroe Embossing ink.  After covering with Raven Embossing Powder, I heat set it and cut it out with a rectangle die.  I stamped the Ghost from Spooky Kids with Raven Detail ink on Perfect Blend Alcohol Paper and colored him in with Copic markers. After I used the coordinating die to cut him out, I used liquid glue to attach my sentiment and image to the front of my panel.  Then I attached the panel to the green amat.  To finish my card,  I chose a white A2 Card base and used liquid glue to attach my matted panel.

ZOMBIE

 I started with Raven Cover Cardstock cut down to 4.25" x 5.5". I used some low tack tape to attach the Slim Line Ripple Stencil to my cardstock at an angle. I covered the edges of my stencil with low tack tape to protect the card panel. Using a Silicone spatula, I spread some Lima Bean Velveteen Glaze across the entire stencil.  (My mind saw this stencil as a brain pattern, which I thought would fit nicely with the zombie.) While the panel was drying, I stamped my image with Raven Detail ink on some Perfect Blend Alcohol Paper,colored it in with Copics, and cut it out with its coordinating die.  Next, I cut down a green piece of paper with a rectangle die from my stash.  I treated the paper with my embossing bag and after stamping my sentiment from Spooky Sentiments with Brutus Monroe Embossing Ink, I covered it with Raven Embossing powder, heat set it and cut it out with a die from my stash.  Once my panel was dry, I used the second largest of the Rectangle Foundation dies to cut it out and mat it on my Green piece.  I used liquid glue to attach my zombie and sentiment to the front of my stenciled panel.  I attached the entire thing to a Raven A2 card base.  Inside I included another piece of green paper with a Happy Halloween Sentiment stamped on it.

WITCH

Taking a piece of white cardstock I attached the Random Dots Stencil with low tack tape.  I took some Marmalade and Amethyst Glitter Glaze and spread each color on a different side.  Then I carefully combined the colors in the middle.  I set the panel aside to dry and worked on my image.  The Spooky Kids witch was stamped on Perfect Blend Alcohol paper with Raven Detail ink and colored in with Copic markers.  I used the Coordinating die to cut her out.  Next, I looked through my scrap bin and found a light purple piece of patterned paper and cut it out with a rectangle die from my stash.  I cut a circle out of the center of the purple panel.  After treating the circle with my embossing bag, I stamped the sentiment from the set with Embossing Ink and covered it with Alabaster Embossing powder.  After heat setting it, I attached it to the front of my card panel along with my colored witch with liquid glue.  Then I glued the panel to my purple mat and then glued the whole thing to the front of my landscaped A2 white card base.

FRANKIE

I started with Raven Cover Cardstock cut down to 4.25" x 5.5". I used some low tack tape to attach the Slim Line Pathway Stencil to my cardstock. I covered the right edge of my card panel with low tack tape to protect it from my glaze.  I used a silicone spatula to spread the Purple Galaxy Glaze over the stencil.  Once I removed the stencil, I sprinkled some Fallen Snow Glitter over parts of the wet glaze for some sparkle and set the panel aside to dry. Next, I stamped the zombie image on some Perfect Blend Alcohol Paper with Raven Detail ink, I colored it in with Copic markers and cut it out with the coordinating die.  Using a scrap piece of purple paper cut down with a Rectangle die from my stash, I stamped my sentiment from the set with Embossing ink.  I sprinkled it with Alabaster Embossing Powder and heat set it.  Then I used a rectangle die to cut it out of the center of my mat.  Once.my Galaxy glaze panel was dry, I used the second largest Rectangle Foundation die to trim it down and attach it to my purple mat.  I used liquid glue to attach my sentiment and Frankie to the front of my panel.  Then I attached the entire thing to a white A2 card base.

PUMPKIN

I started with a piece of white cardstock cut down to 4.25" x 5.5". I used some low tack tape to attach the Kramer Stencil to my cardstock.  I used a silicone spatula to spread some Lima Bean Velveteen Glaze over the entire panel and then set it aside to dry.  One it was dry, I cut it out with the second largest Rectangle Foundation die.  I matted the panel on a piece of orange with white polkadot paper from my scrap bin.  This patterned paper was cut down to a mat side with another rectangle die from my stash.  Before I attached the panel to the patterned paper, I cut out a rectangle from the center with a die from my stash.  I treated this rectangle with my antistatic bag and stamped my sentiment with Brutus Monroe Embossing Ink.  I covered the ink with Raven Embossing Powder and heat set it.  I attached the Pumpkin girl and sentiment to the front of my matted Velveteen panel with liquid glue.  Then I attached the entire thing to my white A2 card base.

List of Products Used (available in the Brutus Monroe Store):  Affliated links are not at any additional cost to you, however, they help support me to bring you new content.

• Spooky Kids Stamp Set
• Spooky Kids Coordinating Die Set
• Raven Cover Stock
• Scarlet Cover Stock
• Perfect Blend Alcohol Paper
• Raven Detail Ink
• Embossing Ink
• Alabaster Embossing Powder
• Raven Embossing Powder
• Rectangle Foundation Dies
• Circle Foundation Dies
• Kramer Stencil 
• Random Dots Stencil
• Glow in the Dark Chroma Glaze
• Galaxy Glaze - Purple
• Lima Bean Velveteen Glaze
• Night Sky Velveteen Glaze
• Twilight Purple Glitter Glaze (amathyst was a glitter glaze of the month so this would be a good substitute)

(I apologize but the Batty, Hoiden and Ripple Slim Line stencil are all retired at this time.  Orange Marmalade was a glitter glaze of the month.)

Stocking Shaped Card with Brutus Monroe

I started by taking an A2 card base and placing the solid outline of the Stocking Die with the left edge hanging over the fold of my cardbase and running it through my Big Shot.  Then I ran it through again with a piece of white cardstock and attached it to my stocking Cardbase.  This covers up the unfinished edge along the fold on my card base.

Taking a piece of white cardstock I sprayed the entire piece with Candy Apple Chroma Mist and Pearl Shimmer Mist and then set it aside to dry.  Once it was dry I ran the piece through my Big Shot with the Decorative (inside) Stocking Die and removed all the inside pieces.  Then I took another scrap piece of white cardstock and ran the Decorative (Inside) piece with just the top "cuff" part of the die.  Then I punched out the holes.  Using a paintbrush I covered the "cuff" piece with Pearl Aqua Pigment.  After about 10 mins of drying time, I trimmed the bottom edge of the cuff with my scissors to match the top edge of the die.  Then I used liquid glue to attach it to the Candy Apple/Pearl stocking piece.

For the backer of the stocking, I ran the outline die through with a piece of dark green cardstock scrap.  Using liquid glue to attach it to the Green outline piece to my cardbase.  Then I attached the Candy Apple/Pearl stocking piece.  Using some clear jewels and tiny green gems, I used some liquid glue to attach them to each of the circles on the Cuff part of the stock.  For a sentiment I used a Christmas Wishes die from my stash and die cut some Silver Mirror card scrap and attached it with liquid glue.  For a finishing touch, I used liquid glue to attach another of the tiny green gems to the "i' in Christmas.

Got Brains? Halloween Card with Brutus Monore

Today's card was inspired by one of my favorite TV shows. I started by stamping the adorable Zombie from Spooky Kids with Raven Detail ink on Perfect Blend Alcohol Paper.  Then I colored him in with some Copic Markers.  I used the coordinating die to cut out the image and then I cut 4 more zombies out of white scatch paper and glued them all together.  This builds dimension behind my colored image.

My cardbase is made from Raven Cardstock and is an side folding A2 card. I placed it in my splat box and splattered some Pearl Shimmer Spray.  Next a peice of gray cardstock and stamped it with a woodgrain stamp from my stash with Woof! ink from Simon Hurley Creates.  Then I cut it out twice with the Woodland Forest Die.  

For my zombie herd, I cut several from black cardstock scraps.  I used a blending tool and Pumice Stone Distress Oxide ink on each of the zombies to give a little shadow to each diecut.  Once my background was dry, I layed the black zombie die cuts and once I was happy with the placement, I used some press n seal to pull my zombies up all together.  I flipped the press n seal over and used liquid glue to attach all the zombie together.  Then I covered the entire herd with liquid glue and flipped it over on top of my background.  Then I carefully removed the press and seal, which helped my place the zombie right where I wanted them.

Then I used some glue to attach my Woodland Forest Die Cuts on top of my zombie herd.  Next, I cut off any overhang.  For a sentiment I grabbed an older stamp set and stamped the Got Brains? with Raven Detail ink on a scrap of Perfect Blend Alcohol paper and used my trimmer to cut it down.

Finally, I used more liquid glue to attach my colored Zombie to the lower right corner of my card. Because of the dimension, I used an acrylic block to hold him in place until the glue dried.

STAMPtember 2021 Brutus Monroe Limited Edition Set

Today is the day for the Limited Edition Brutus Monroe #Stamptember set with Simon Says Stamp. This set is only availble in September and while supplies lasts over at Simon Says Stamp.

Apple Card: 

I started by stamping out the apple and sticking with Raven Detail ink on Brutus Monroe Perfect Blend Alcohol Paper. Next, I colored them in with Copic Markers.  Then, using my Scan and cut to Cut the images out and attach the stick to the back of my apple with a piece of washi tape.  For my card panel, I took a piece of Brutus Monroe Scarlet Cardstock and cut it down to 4.25" x 5.5."  Using my Misti, I stamped the caramel apple image all over the paper with Brutus Monroe Embossing Ink.  Then I covered the entire panel with Pearl Embossing Powder from Brutus Monroe and heat set it.  I cut down the panel to about 4" x 5.25" and attached it the front of my top folding A2 white card base.  To attach my colored image, I used some of Brutus Monroe's Easy Foam Tabs.  I stamped the sentiment with Simon Hurley Creates Bee Sting ink and used a sentiment strip die to cut it out.  Finally, I attached the sentiment to the front of my card and trimmed off any overhang.  

Snowman Card:

I started out stamping the snoman image on Brutus Monroe Perfect Blend Alcohol Paper with Raven Detail ink.  I used Copics to color in my image and then fussy cut it out.

Using an older Darice Embossing folder, I ran my white card panel through my Big Shot and trimmed it down to about 4" x 5.25."  I chose a piece of paper from the Brutus Monroe Playful Plaid pack and cut it down to A2 card front size.  Using a small piece of the same paper,  I cut an rectangle to mat behind my Snowman piece and attached it to my embossed white panel.  I stamped the sentiment from the set with Raven Detail ink in the top left corner above my image and then matted the panel to the plaid mat.  After I attached the matted panel to my A2 Card base, I used some glossy accents on the eyes, mouth and hat brim of my image for some shine.

Halloween Card:

I stated with a Precut Slim line panel from Brutus Monroe and placed it in my splat box.  I used some Cobweb Limited edition to spray the front of my panel.  Then I used  Tangerine Orange Chroma Mist, (removing the nozzle and using the tube) to splatter over the background.  Next, I used some Creamy Green and Pearl Aqua Pigments which I mixed with some water on an acrylic block, and splattered this over the entire panel with a paint brush.  I repeated this with Hunter mixed with Pearl Aqua Pigments.  To speed the drying, I heated the panel with my heat tool.  Then I used the Spooky Eyes Slim Line Stencil and  spread the Glow in the Dark Chroma glaze over the panel.  After removing and cleaning my tools, I set the panel aside to dry. While the panel dried, I stamped my images with Raven Detail ink on Perfect Blend Alcohol paper and colored them in with Copic Markers. Once my panel was dry, I cut it down to 3" x 8.25" and matted it on a piece of Raven Cardstock that measured 3.5" x 8.5."  I arranged the panel in my Misti and stamped the Spooky sentiment in Raven Detail Ink, using the mummy apples for placement.  I attached the Mummy Apples with liquid glue.  Then I adhered the entire panel to my Precut Slim line card base from Brutus Monroe.  Finally, I added some Glow in the Dark Chroma Glaze to the eyes of my images with a fine tip paint brush. 

Here is a close up of the Pearl Embossing Powder on my apple card:

If you have not tried the Glow in the Dark Chroma Glaze, you should get some right away, its amazing.  Here is a picture of the Back ground.  I did not charge the "glow" for long:

I included my affliated (with no cost to you) to all the products available in the Brutus Monroe store above.

However to purchase the STAMPtember stamp and die set for a limited time, while supplies last. Here is a link to the set at Simon Says Stamp: https://www.simonsaysstamp.com/product/brutus-monroe-stamptember-exclusive-stamp-and-die-set-sssd112486c?c=2553

Customers can also purchase the stamp set for a limited time, while supplies last. https://www.simonsaysstamp.com/product/waffle-flower-stamptember-exclusive-stamp-set-sss202410c?c=2553

Trio of Halloween Slimline Cards with Brutus Monroe

 

Today I am up on the Brutus Monroe Blog.  Fall is tied as my favorite season along with winter (shocking I know).  However I love Halloween, my daughter was born in October and fittingly could celebrate Halloween all year round.  I always tried to make Halloween special for her and I love making her Halloween cards.

Today I have three cards for you featuring the witches from the Crafty Witch and Witches Brew Stamp sets.  All three cards were made the same but with different stamps, inks and stencils.

To start, I cut down three heavy white cardstock to 8.5" x 7" panels, scored each at 3.5" to create my card bases.  Each 8.5" x 11" cardstock gives me one card base and a card panel.  The card panels measure 8.5" x 4" which I cut down to 8.5" x 3."  First I used Raven Detail ink to stamp the three witches on the bottom half of the card panels.  Then, I used Copic markers to color them.  

Before I inkblended my backgrounds, I created masks for each witch with Masking Paper (or you could use Post-it note paper).  I trimmed each mask down the middle of the outside edge of each stamp.  This gives me masks that are slightly smaller than my image, but yet still cover up the image completely.

Once I covered each colored image with their coordinating masks, I used Distressed inks to lightly ink each background.  Then I used the same ink and a stencil to heavily apply the pattern to a few areas around the panel.

For the Spell Book witch, I used Seedless Preserves and the Batty Stencil.

For the Pumpkin witch, I used Twisted Citron and the Hidden Temple Stencil.

For the Cauldron witch, I used Carved Pumpkin and the Honeycomb Stencil.

Next, keeping the masks in place, I place the three panels in my splat box so I could add some splatter.  For the Black Splatter, I used Raven detail reinker and a tiny bit of water to thin it out on an acrylic block and a paint brush to flick it over the card panels.  For the Shimmer splatter, I removed the pump/sprayer from the Pearl Shimmer Mist and used the plastic tube and lightly shook it over the card panels.

Once the panels dried, (it took about 15 mins) I placed each panel in my Original Misti and stamped the sentiments from Crafty Witch with Raven Detail ink towards the top of each panel.  Then I matted each panel on some Raven Cardstock that measured about 3.25" x 8.5" and then finally glued the panels to my white card bases.

Which card is your favorite?  Do you decorate for fall or  Halloween? Thank you for stopping by and have a great day.